Kumfi Diamond is an extremely durable extra thick anti-fatigue mat suitable for use in a wide variety of dry environments. The diamond pattern and bevelled edges, provide exceptional worker comfort and safety. Kumfi Diamond also benefits from a tough vinyl Dyna-Shield coating that provides 50% more wear resistance, whilst also providing a barrier to cold floors.
Interflex Hazard is a hard wearing anti-slip resistant black PVC matting with high visibility yellow strips down each side for workplace safety and roof walkways. Suitable for heavy duty industrial and commercial environments where slip hazards exist. The matting is designed to self-drain making it suitable for use in wet areas both indoor and outdoor, and is oil, grease and chemical resistant. Connector clips are available for side or end joining to create the perfect shape or fit.Wind load tested: Up to 80mph.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
Diamond Grip - Hazard is an extremely tough, durable self-adhesive anti-slip tape with hazard chevrons for added protection for medium to high traffic areas. Along with possessing exceptional grip levels, the safetygrip is waterproof, can sustain most chemicals and, be used inside or out for added protection on steps or walkways.
Diamond Grip - General Purpose is a tough, durable self-adhesive anti-slip tape perfect for medium to high traffic areas. Along with possessing excellent grip levels, the safety-grip is waterproof, can sustain most chemicals and, can be used inside or out for added protection on steps or walkways.
Chequer Plate Matting is a low-cost surface covering, recommended for applications where safety and slip protection are crucial but without the need for anti-fatigue properties. The diamond-embossed chequer plate surface provides exceptional non-directional grip, making it suitable for workbenches as well as flooring. This lightweight matting is available in both rolls and cut lengths.
Cellmax connectors are used to connect the mats together to create walkways and any other shape or size required. They simply click into position to create a secure straight edge between the mats. The recommended number of connectors is four when connecting the shorter sides and five when connecting the longer sides.Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also has a straight edge design which allows the mats to be joined together using the connectors to cover large areas. This product also offers exceptional anti-fatigue benefits and the slip resistant surface is ideal for use in wet areas.Wind load tested: Up to 60mph.
Cushion Link bevel edges enhance safety by removing the risk of trips and falls, whilst being aesthetically pleasing. The bevels also highlight the edges to the mat and ensure the tiles are suitable for wheeled use.Please note there are two types of bevels – female and male and each tile has two female and two male sides. The bevels simply click into position to create the ramped edge.Our Cushion Link range is a modular anti-fatigue matting system, featuring either an open, or solid top design with differing surfaces and production methods.Compatible with our Cushion Link Open and Solid Top range.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - General Purpose contains 25% nitrile making the product resistant to extreme temperatures. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.
Kumfi Diamond is an extremely durable extra thick anti-fatigue mat suitable for use in a wide variety of dry environments. The diamond pattern and bevelled edges, provide exceptional worker comfort and safety. Kumfi Diamond also benefits from a tough vinyl Dyna-Shield coating that provides 50% more wear resistance, whilst also providing a barrier to cold floors.
Interflex Hazard is a hard wearing anti-slip resistant black PVC matting with high visibility yellow strips down each side for workplace safety and roof walkways. Suitable for heavy duty industrial and commercial environments where slip hazards exist. The matting is designed to self-drain making it suitable for use in wet areas both indoor and outdoor, and is oil, grease and chemical resistant. Connector clips are available for side or end joining to create the perfect shape or fit.Wind load tested: Up to 80mph.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
Diamond Grip - Hazard is an extremely tough, durable self-adhesive anti-slip tape with hazard chevrons for added protection for medium to high traffic areas. Along with possessing exceptional grip levels, the safetygrip is waterproof, can sustain most chemicals and, be used inside or out for added protection on steps or walkways.
Diamond Grip - General Purpose is a tough, durable self-adhesive anti-slip tape perfect for medium to high traffic areas. Along with possessing excellent grip levels, the safety-grip is waterproof, can sustain most chemicals and, can be used inside or out for added protection on steps or walkways.
Chequer Plate Matting is a low-cost surface covering, recommended for applications where safety and slip protection are crucial but without the need for anti-fatigue properties. The diamond-embossed chequer plate surface provides exceptional non-directional grip, making it suitable for workbenches as well as flooring. This lightweight matting is available in both rolls and cut lengths.
Cellmax connectors are used to connect the mats together to create walkways and any other shape or size required. They simply click into position to create a secure straight edge between the mats. The recommended number of connectors is four when connecting the shorter sides and five when connecting the longer sides.Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also has a straight edge design which allows the mats to be joined together using the connectors to cover large areas. This product also offers exceptional anti-fatigue benefits and the slip resistant surface is ideal for use in wet areas.Wind load tested: Up to 60mph.
Cushion Link bevel edges enhance safety by removing the risk of trips and falls, whilst being aesthetically pleasing. The bevels also highlight the edges to the mat and ensure the tiles are suitable for wheeled use.Please note there are two types of bevels – female and male and each tile has two female and two male sides. The bevels simply click into position to create the ramped edge.Our Cushion Link range is a modular anti-fatigue matting system, featuring either an open, or solid top design with differing surfaces and production methods.Compatible with our Cushion Link Open and Solid Top range.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - General Purpose contains 25% nitrile making the product resistant to extreme temperatures. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.