With Octaguard, you can add coloured insert brushes, which not only enhance the scraping action to remove dirt but can also be used to create logos, add messages, or your brand colours to your mat. Available in Black, Blue and Grey with other colours available on request.Octaguard is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Octaguard also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Lustre is a highly effective hard wearing entrance mat designed to manage moisture and dirt control in high traffic areas. Constructed of polyamide twisted fibres with double reinforced boarder, the mats all have an anti-slip gripper, 100% nitrile rubber backing that prevents mat movement. Lustre is available in a range of shapes, sizes and colours to suit any environment.
Dynamat is a heavy duty, premium quality loose-lay floor mat that offers excellent shock absorption qualities and exceptional resistance to wear. Available in two thicknesses, 10mm and 17mm, Dynamat is a virtually indestructible dense rubber mat, used to protect floors and provide insulation for the most demanding applications. The wide ribbed pattern on the reverse allows drainage, whilst the dense rubber textured anti-slip surface, makes Dynamat the perfect solution for industrial sites, gyms, stables, kennels, livery enclosures, dog grooming areas, golf courses, ice rinks and much more.
Diamond Grip - Hazard is an extremely tough, durable self-adhesive anti-slip tape with hazard chevrons for added protection for medium to high traffic areas. Along with possessing exceptional grip levels, the safetygrip is waterproof, can sustain most chemicals and, be used inside or out for added protection on steps or walkways.
Diamond Grip - General Purpose is a tough, durable self-adhesive anti-slip tape perfect for medium to high traffic areas. Along with possessing excellent grip levels, the safety-grip is waterproof, can sustain most chemicals and, can be used inside or out for added protection on steps or walkways.
Chequer Plate Matting is a low-cost surface covering, recommended for applications where safety and slip protection are crucial but without the need for anti-fatigue properties. The diamond-embossed chequer plate surface provides exceptional non-directional grip, making it suitable for workbenches as well as flooring. This lightweight matting is available in both rolls and cut lengths.
Cellmax connectors are used to connect the mats together to create walkways and any other shape or size required. They simply click into position to create a secure straight edge between the mats. The recommended number of connectors is four when connecting the shorter sides and five when connecting the longer sides.Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Sticky Step Plastic has been designed to help prevent contamination from entering controlled working environments. The mat features an anti-microbial adhesive surface which helps remove dust and dirt from footwear or wheeled trolleys. Sticky Step Plastic is formed of 30 peel-off layers, making it perfect for maintaining clean room and laboratory standards. The overall thickness is 2mm and the bottom of the mat securely adheres to any clean, dry surface. Sold in packs of four, Sticky Step Plastic can be used for a wide variety of applications, from data centres, medical, pharmaceutical, electronics, aerospace, instrumentation, nuclear to construction environments.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas and catering kitchens. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - 100% Nitrile is resistant to extreme temperatures, oils, coolants, and most chemicals. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean, and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.
Sanibrush has been designed to improve hygiene in food preparation and processing areas as well as for entrances to kitchens and catering facilities. The ramped edges retain disinfectant solution whilst the raised nib design not only offers an efficient scrubbing action, the nibs compress under foot traffic, bringing footwear into contact with the disinfectant. Sanibrush also offers great anti-fatigue benefits.
Kumfi Diamond is an extremely durable extra thick anti-fatigue mat suitable for use in a wide variety of dry environments. The diamond pattern and bevelled edges, provide exceptional worker comfort and safety. Kumfi Diamond also benefits from a tough vinyl Dyna-Shield coating that provides 50% more wear resistance, whilst also providing a barrier to cold floors.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Cushion Link bevel edges enhance safety by removing the risk of trips and falls, whilst being aesthetically pleasing. The bevels also highlight the edges to the mat and ensure the tiles are suitable for wheeled use.Please note there are two types of bevels – female and male and each tile has two female and two male sides. The bevels simply click into position to create the ramped edge.Our Cushion Link range is a modular anti-fatigue matting system, featuring either an open, or solid top design with differing surfaces and production methods.Compatible with our Cushion Link Open and Solid Top range.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - General Purpose contains 25% nitrile making the product resistant to extreme temperatures. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.
GroundTrak PRO Connectors are designed to securely join GroundTrak PRO mats together, allowing you to create custom-sized spaces, temporary roadways, and larger flooring areas with ease. To affix, simply align the pre-drilled corner holes of adjacent mats and fasten using either our two-way or four-way connectors, depending on your layout requirements. This ensures a stable, interlocked surface that prevents shifting, even under heavy loads. Each GroundTrak PRO mat requires six connectors to fully secure all sides.
Two-way connectors – Ideal for straight-line formations such as roadways or access paths.
Four-way connectors – Perfect for larger coverage areas requiring multiple interlocked connections.
Both connectors are engineered for durability while allowing a slight degree of flex, reducing stress on the mats and helping to prevent damage during use. GroundTrak PRO is the heavy-duty version of our trusted GroundTrak mat, designed to deliver exceptional temporary ground protection in the most demanding environments.
Heavy-duty load capacity – Supports up to 60 tonnes, depending on ground conditions.
Dual-sided design – One side with a 1-bar chequer plate surface for pedestrian use, and the other with a 4-bar chequer plate for vehicle use.
Lightweight and easy to handle – Integrated handles allow for quick lifting and positioning.
Non-slip surface pattern – Ensures maximum grip and durability in all conditions.
Weatherproof and maintenance-free – Resistant to oils, chemicals, and extreme weather, delivering long-lasting performance.
With Octaguard, you can add coloured insert brushes, which not only enhance the scraping action to remove dirt but can also be used to create logos, add messages, or your brand colours to your mat. Available in Black, Blue and Grey with other colours available on request.Octaguard is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Octaguard also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Lustre is a highly effective hard wearing entrance mat designed to manage moisture and dirt control in high traffic areas. Constructed of polyamide twisted fibres with double reinforced boarder, the mats all have an anti-slip gripper, 100% nitrile rubber backing that prevents mat movement. Lustre is available in a range of shapes, sizes and colours to suit any environment.
Dynamat is a heavy duty, premium quality loose-lay floor mat that offers excellent shock absorption qualities and exceptional resistance to wear. Available in two thicknesses, 10mm and 17mm, Dynamat is a virtually indestructible dense rubber mat, used to protect floors and provide insulation for the most demanding applications. The wide ribbed pattern on the reverse allows drainage, whilst the dense rubber textured anti-slip surface, makes Dynamat the perfect solution for industrial sites, gyms, stables, kennels, livery enclosures, dog grooming areas, golf courses, ice rinks and much more.
Diamond Grip - Hazard is an extremely tough, durable self-adhesive anti-slip tape with hazard chevrons for added protection for medium to high traffic areas. Along with possessing exceptional grip levels, the safetygrip is waterproof, can sustain most chemicals and, be used inside or out for added protection on steps or walkways.
Diamond Grip - General Purpose is a tough, durable self-adhesive anti-slip tape perfect for medium to high traffic areas. Along with possessing excellent grip levels, the safety-grip is waterproof, can sustain most chemicals and, can be used inside or out for added protection on steps or walkways.
Chequer Plate Matting is a low-cost surface covering, recommended for applications where safety and slip protection are crucial but without the need for anti-fatigue properties. The diamond-embossed chequer plate surface provides exceptional non-directional grip, making it suitable for workbenches as well as flooring. This lightweight matting is available in both rolls and cut lengths.
Cellmax connectors are used to connect the mats together to create walkways and any other shape or size required. They simply click into position to create a secure straight edge between the mats. The recommended number of connectors is four when connecting the shorter sides and five when connecting the longer sides.Cellmax is sturdy rubber duckboard that provides excellent rigidity due to its solid cellular construction. The octagonal shaped drainage holes have raised edging which allows fluid and debris to fall through, leaving a clear surface. Cellmax also offers exceptional anti-fatigue benefits, and the slip resistant surface makes it ideal for use in wet areas.
Sticky Step Plastic has been designed to help prevent contamination from entering controlled working environments. The mat features an anti-microbial adhesive surface which helps remove dust and dirt from footwear or wheeled trolleys. Sticky Step Plastic is formed of 30 peel-off layers, making it perfect for maintaining clean room and laboratory standards. The overall thickness is 2mm and the bottom of the mat securely adheres to any clean, dry surface. Sold in packs of four, Sticky Step Plastic can be used for a wide variety of applications, from data centres, medical, pharmaceutical, electronics, aerospace, instrumentation, nuclear to construction environments.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas and catering kitchens. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - 100% Nitrile is resistant to extreme temperatures, oils, coolants, and most chemicals. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean, and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.
Sanibrush has been designed to improve hygiene in food preparation and processing areas as well as for entrances to kitchens and catering facilities. The ramped edges retain disinfectant solution whilst the raised nib design not only offers an efficient scrubbing action, the nibs compress under foot traffic, bringing footwear into contact with the disinfectant. Sanibrush also offers great anti-fatigue benefits.
Kumfi Diamond is an extremely durable extra thick anti-fatigue mat suitable for use in a wide variety of dry environments. The diamond pattern and bevelled edges, provide exceptional worker comfort and safety. Kumfi Diamond also benefits from a tough vinyl Dyna-Shield coating that provides 50% more wear resistance, whilst also providing a barrier to cold floors.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Cushion Link bevel edges enhance safety by removing the risk of trips and falls, whilst being aesthetically pleasing. The bevels also highlight the edges to the mat and ensure the tiles are suitable for wheeled use.Please note there are two types of bevels – female and male and each tile has two female and two male sides. The bevels simply click into position to create the ramped edge.Our Cushion Link range is a modular anti-fatigue matting system, featuring either an open, or solid top design with differing surfaces and production methods.Compatible with our Cushion Link Open and Solid Top range.
Cushion Link Open Top is a modular anti-fatigue matting system. This ultimate matting provides outstanding ergonomic comfort and safety in heavy duty dry or wet industrial areas. Manufactured from the highest quality resilient rubber compounds, Cushion Link Open Top - General Purpose contains 25% nitrile making the product resistant to extreme temperatures. The adaptable open top design provides excellent drainage and swarf removal leaving the floor surface dry, clean and safe.All Cushion Link mats can be interlocked and edged using a simple bevel system to create any size or shape, whilst the unique interlocking mechanism along with male and female edges and bevels, provide secure connectivity. This product is also compatible with our Cushion Link Solid Top range.
GroundTrak PRO Connectors are designed to securely join GroundTrak PRO mats together, allowing you to create custom-sized spaces, temporary roadways, and larger flooring areas with ease. To affix, simply align the pre-drilled corner holes of adjacent mats and fasten using either our two-way or four-way connectors, depending on your layout requirements. This ensures a stable, interlocked surface that prevents shifting, even under heavy loads. Each GroundTrak PRO mat requires six connectors to fully secure all sides. Two-way connectors – Ideal for straight-line formations such as roadways or access paths. Four-way connectors – Perfect for larger coverage areas requiring multiple interlocked connections. Both connectors are engineered for durability while allowing a slight degree of flex, reducing stress on the mats and helping to prevent damage during use. GroundTrak PRO is the heavy-duty version of our trusted GroundTrak mat, designed to deliver exceptional temporary ground protection in the most demanding environments. Heavy-duty load capacity – Supports up to 60 tonnes, depending on ground conditions. Dual-sided design – One side with a 1-bar chequer plate surface for pedestrian use, and the other with a 4-bar chequer plate for vehicle use. Lightweight and easy to handle – Integrated handles allow for quick lifting and positioning. Non-slip surface pattern – Ensures maximum grip and durability in all conditions. Weatherproof and maintenance-free – Resistant to oils, chemicals, and extreme weather, delivering long-lasting performance.