Diamond Grip - Hazard is an extremely tough, durable self-adhesive anti-slip tape with hazard chevrons for added protection for medium to high traffic areas. Along with possessing exceptional grip levels, the safetygrip is waterproof, can sustain most chemicals and, be used inside or out for added protection on steps or walkways.

Diamond Interlock is a heavy duty, interlocking rubber mat designed for quick and easy on-site installation in dry industrial environments. The mats are available as centre or end pieces for continuous lengths with bevelled edges to all sides for added safety. Along with being a very tough and durable mat, the moulded air pockets to the underside provide extra traction and ergonomic benefits.

Our double-sided high performance tape provides superior bonding for heavy-duty, high-traffic environments. Suitable for use with our Forklift Mat to ensure maximum effectiveness, reducing the risk of slips, trips and falls.The double-sided open weave PET cloth design has been specifically manufactured to ensure durability and longevity with use. Our adhesive tape will bond to nearly any material, just make sure the surface is smooth, clean, and dry before applying.Available in 50m rolls.

Dynamat is a heavy duty, premium quality loose-lay floor mat that offers excellent shock absorption qualities and exceptional resistance to wear. Available in two thicknesses, 10mm and 17mm, Dynamat is a virtually indestructible dense rubber mat, used to protect floors and provide insulation for the most demanding applications. The wide ribbed pattern on the reverse allows drainage, whilst the dense rubber textured antislip surface, makes Dynamat the perfect solution for industrial sites, gyms, stables, kennels, livery enclosures, dog grooming areas, golf courses, ice rinks and much more.

Ecosorb is an anti-fatigue mat designed for combined use with a replaceable sorbent. Manufactured from top quality nitrile rubber, this mat is the perfect option for use in medium duty, wet or oily industrial environments. The rough gripper surface and raised ramped edges hold the sorbent firmly in place, whilst the bubble design and moulded air pockets provide buoyancy for anti-fatigue relief. Ecosorb is supplied with one sorbent infill, additional refills can be purchased separately.

Our sorbent refills are for combined use with Ecosorb, our hugely popular anti-fatigue mat designed for placement in manufacturing plants, production lines, assembly lines, in front of CNC machines, metal working, individual workstations and custom work platforms. - The sorbent efficiently captures liquids, oil and grease leaving the surface clear and safe.Manufactured from top quality nitrile rubber, Ecosorb is the perfect option for use in medium duty, wet or oily environments. The rough gripper surface and raised ramped edges hold the sorbent firmly in place, whilst the bubble design and moulded air pockets provide buoyancy for anti-fatigue relief.

Ergotred is a versatile anti-fatigue loose lay mat which is manufactured from heavy duty flexible rubber known for its 5-star comfort rating. The domed air cushioned pockets across the surface have been designed to provide optimal worker comfort and improve circulation. The bevelled yellow edges and suction cup backing enhance the anti-slip properties, making it an ideal mat for heavy duty dry industrial and manufacturing environments and many more applications.

We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.

ESD Kumfi Pebble has been specially designed to dissipate static electricity and reduce fatigue for medium duty areas. Simple tasks - working, walking or, even sitting on certain types of stools, can create static electric. When left unchecked, static can discharge into static sensitive equipment, potentially causing damage. Our ESD Kumfi Pebble drains static from workers, preventing unpleasant static shocks, whilst also safeguarding equipment. The pebble surface design provides anti-slip protection and the bevelled edges on all sides minimises the risk of tripping. Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.

ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.

GRP Grating Clips and Clamps complement our range of GRP grating and provide best-practice fixing methods for fastening and joining grating panels. We supply M Clips and C Clips to fit 25mm, 38mm and 50mm grating, M Clip for Mini Mesh, universal J Clamp and our Square Fixing Clip and Fixing Disc for 25mm, 38mm and Mini Mesh grating, all in stainless steel.

Happy Feet is a heavy-duty anti-fatigue mat that features a 12.7mm dense foam cushion encapsulated in nitrile rubber, making it suitable for both wet and dry environments. Offering exceptional anti-fatigue benefits, the gripper backing minimises movement on the floor, whilst the textured surface and bevelled borders maximise safety. Happy Feet is a totally versatile mat, is welding safe and resistant to chemicals, animal fats, machine grease/oils and petroleum products.