Rubber Rib Mat Electrical IEC (1000v)
Rubber Rib Mat Electrical (1000v) is a high quality, non-conductive rubber safety mat, designed to provide insulation and protect workers from electric shocks. Rubber Rib Mat Electrical is fully certified and tested to 5000 volts, with a recommended working voltage of 1000 volts. The regulation standard is stamped on the reverse at 1m intervals. The fine ribbed surface also offers great anti-slip protection and has an overall thickness of 6mm.
- Low cost surface covering, suitable for industrial flooring, aisles, work benches and vehicle interiors
- 100% rubber with fine ribbed surface for sure footing and easy cleaning
- Available in 3mm and 6mm thickness
- Available in rolls or cut lengths
Great slip resistance to level 2
Good anti-fatigue properties, resistant to level 1
The fine ribbed surface offers great wear resistance to level 2
Cut to length
Cut to size
Yes, the low profile makes it suitable for wheelchair users
Yes, the low profile allows easy access for light weight wheeled traffic
Suitable for indoor use
Non-conductive (HV Electrical)
- Fully electrically tested and certified to 5000v, recommended safety working voltage of 1000v
- Tensile strength (N/mm²): 3.5 (ISO 37)
- Hardness Shore A: +/-5 70° (ISO 7619-1)
- Density SG (g/cm²): 1.5 (ISO 37)
- Elongation: 300% (ISO 37)
- Abrasion resistance (mm3): 180 (ISO 37)
- Tear strength: 20 (ISO 34-1)
- Slip resistance: (ISO59040) Greater than 50N
- Mechanical puncture resistance: Greater than 70N
- REACH (Registration, Evaluation, Authorisation and Restrictions of Chemicals)
- Contributes to a clearer environment by reducing the need to use cleaning chemicals
-20°C to +70°C
Wash with cold water, use vacuum cleaner, or use a pressure pump to remove dirt. The use of hard detergents is not recommended
Perfect solution for live switchboards, lower voltage switchboard applications, generators, electrical equipment and repair workstations.
|RE-IEC691||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 90cm x 10m Roll||80|
|RE-IEC6100||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 100cm x 10m Roll||88|
|RE-IEC6122||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 120cm x 10m Roll||106|
|RE-IEC691C||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 90cm Wide (Cut length - per metre)||8|
|RE-IEC6100C||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 100cm Wide (Cut length - per metre)||8.8|
|RE-IEC6122C||Rubber Rib Mat Electrical Class 0 - 1000v - 6mm x 120cm Wide (Cut length - per metre)||10.6|
Your Kumfi flooring is now in place in our workshop. We've had great feedback from the team so far both in terms of aesthetically and from a safe, grip anti-slip floor covering. Along with the quick turnaround time for delivery and the helpfulness of your team, we couldn't have asked for a better service. Thank you, Blue Diamond.
Steve Fleming, Director | Storagenstuff
Thank you, thank you! From my initial enquiry to despatch, your speed of service has been exceptional. To know that I can rely on you to have stock when I need it, plus receive same day despatch, you have certainly made my job easier. Blue Diamond, its official, you truly are my favourite supplier.
James Lincoln, Sales Development, ESE Direct
Blue Diamond have seriously impressed us with their speed of service and excellent communication. Orders are frequently sent out same day and the invaluable tracking information quickly follows. The quality of their products is first class and the team regularly go the extra mile to ensure that things run smoothly. Keep up the good work!
Mark O’Sullivan, Director, Trusted Mats