Plushway is a hardwearing all purpose mat perfect for moderate to high traffic areas. Made using durable polypropylene fibres that are heat bonded to a heavy duty vinyl base, Plushway is great for trapping and removing soil and dirt as well as providing good moisture control. The Plushway has also been designed to offer protection to floor surfaces, as well as helping prevent slips, trips and falls. Available in a range of sizes and colours to suit your individual requirements.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Our GRP Open Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it lightweight and also chemical, rust, and corrosion resistant whilst offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Available in 25mm, 38mm and 50mm thickness and an array of colours.Optional clips, bolts and clamps are available to purchase if required.
Our GRP Mini Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it chemical, rust, and corrosion resistant, and lightweight, whilst also offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Optional clips, bolts and clamps are available to purchase if required.
Greenskeeper is an easy to install natural rubber matting, perfect for discreet soil retention and erosion control whilst also providing safety and added traction on steep paths. The moulded anti-slip cellular structure allows grass to penetrate, establishing a firm bond to the ground. Grass can easily be cut with a conventional mower once established, effectively hiding the mat. Connectors can be used to create any shape or size, whilst the pegs ensure the matting stays securely in place. Greenskeeper is also the perfect solution for safety walkways on construction sites where a hard-wearing anti-slip ground protection is required.Our 100cm x 150cm mats come in two thicknesses, 16mm and 23mm, with the 23mm option also available in a convenient 10.5 mtr roll.The 23mm Greenskeeper has also been tested and passed the Critical Fall Height test - certified to EN 1177:2018.
Tuff-Tile HD Textured is a heavy duty, tough, non-slip interlocking tile system designed to provide excellent durability and comfort. Resistant to most chemicals and solvents, Tuff-Tile HD Textured also offers total protection to existing floors by reducing damage caused by impact, abrasion, and vibration. For use both indoors and outside, wet and dry environments, the tiles are suitable for fork trucks, pallet trucks, stillages and heavy loads as well as for wheelchairs, pushchairs, and trolleys. The tiles are easy and quick to assemble due to their unique interlocking join. With an overall height of 7mm, bevel edges are needed to create the ramped edge, plus corner tiles to ensure a secure fit.Black in stock, other colours available on request.
Our Knee Saver is a convenient lightweight portable pad designed to reduce trauma, stress and strain on the knees and lower back caused by regular kneeling. Manufactured from a nitrile/PVC foam blend, our Knee Saver provides a comfortable work surface for those who are required to kneel while working and eliminates the hassle and discomfort of wearing knee pads. Our Knee Saver can be used on gravel, asphalt, concrete, dirty/oily surfaces, tile wood flooring, metal grating and grass – basically any surface, plus the nitrile/PVC blend offers the highest degree of resistance to oil and grease.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
ESD Kumfi Pebble has been specially designed to dissipate static electricity and reduce fatigue for medium duty areas. Simple tasks - working, walking or, even sitting on certain types of stools, can create static electric. When left unchecked, static can discharge into static sensitive equipment, potentially causing damage. Our ESD Kumfi Pebble drains static from workers, preventing unpleasant static shocks, whilst also safeguarding equipment. The pebble surface design provides anti-slip protection and the bevelled edges on all sides minimises the risk of tripping. Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
Plushway is a hardwearing all purpose mat perfect for moderate to high traffic areas. Made using durable polypropylene fibres that are heat bonded to a heavy duty vinyl base, Plushway is great for trapping and removing soil and dirt as well as providing good moisture control. The Plushway has also been designed to offer protection to floor surfaces, as well as helping prevent slips, trips and falls. Available in a range of sizes and colours to suit your individual requirements.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Our GRP Open Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it lightweight and also chemical, rust, and corrosion resistant whilst offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Available in 25mm, 38mm and 50mm thickness and an array of colours.Optional clips, bolts and clamps are available to purchase if required.
Our GRP Mini Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it chemical, rust, and corrosion resistant, and lightweight, whilst also offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Optional clips, bolts and clamps are available to purchase if required.
Greenskeeper is an easy to install natural rubber matting, perfect for discreet soil retention and erosion control whilst also providing safety and added traction on steep paths. The moulded anti-slip cellular structure allows grass to penetrate, establishing a firm bond to the ground. Grass can easily be cut with a conventional mower once established, effectively hiding the mat. Connectors can be used to create any shape or size, whilst the pegs ensure the matting stays securely in place. Greenskeeper is also the perfect solution for safety walkways on construction sites where a hard-wearing anti-slip ground protection is required.Our 100cm x 150cm mats come in two thicknesses, 16mm and 23mm, with the 23mm option also available in a convenient 10.5 mtr roll.The 23mm Greenskeeper has also been tested and passed the Critical Fall Height test - certified to EN 1177:2018.
Tuff-Tile HD Textured is a heavy duty, tough, non-slip interlocking tile system designed to provide excellent durability and comfort. Resistant to most chemicals and solvents, Tuff-Tile HD Textured also offers total protection to existing floors by reducing damage caused by impact, abrasion, and vibration. For use both indoors and outside, wet and dry environments, the tiles are suitable for fork trucks, pallet trucks, stillages and heavy loads as well as for wheelchairs, pushchairs, and trolleys. The tiles are easy and quick to assemble due to their unique interlocking join. With an overall height of 7mm, bevel edges are needed to create the ramped edge, plus corner tiles to ensure a secure fit.Black in stock, other colours available on request.
Our Knee Saver is a convenient lightweight portable pad designed to reduce trauma, stress and strain on the knees and lower back caused by regular kneeling. Manufactured from a nitrile/PVC foam blend, our Knee Saver provides a comfortable work surface for those who are required to kneel while working and eliminates the hassle and discomfort of wearing knee pads. Our Knee Saver can be used on gravel, asphalt, concrete, dirty/oily surfaces, tile wood flooring, metal grating and grass – basically any surface, plus the nitrile/PVC blend offers the highest degree of resistance to oil and grease.
ESD Worktop Matting is a cost-effective, hard-wearing anti-static matting ideal for laying on workbenches in advanced laboratories, and microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits.The mats feature two layers, a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents, and the black conductive layer provides a superior and consistent ground path to Earth.Available in dark blue or dark grey, these mats are easy to clean with excellent lay-flat properties for a flat work surface.Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
ESD Kumfi Pebble has been specially designed to dissipate static electricity and reduce fatigue for medium duty areas. Simple tasks - working, walking or, even sitting on certain types of stools, can create static electric. When left unchecked, static can discharge into static sensitive equipment, potentially causing damage. Our ESD Kumfi Pebble drains static from workers, preventing unpleasant static shocks, whilst also safeguarding equipment. The pebble surface design provides anti-slip protection and the bevelled edges on all sides minimises the risk of tripping. Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
