Our GRP Mini Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it chemical, rust, and corrosion resistant, and lightweight, whilst also offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Optional clips, bolts and clamps are available to purchase if required.
GRP Grating Clips and Clamps complement our range of GRP Grating and provide best-practice fixing methods for fastening and joining grating panels. We supply M Clips and C Clips to fit 25mm, 38mm and 50mm Grating, M Clip for Mini Mesh, universal J Clamp and our Square Fixing Clip and Fixing Disc for 25mm, 38mm and Mini Mesh Grating, all in stainless steel. We also supply Panel Fasteners Hex and Nut, Bolt, and Washer Sets.
GRP handrail tube is a lightweight, non-conductive, corrosion-resistant pultruded round tube manufactured from glass reinforced plastic (GRP). It cuts to size and installs with minimal tooling, keeping labour costs down across a wide range of project specifications.
Commonly used as a handrail tubing along pedestrian walkways and staircases, or applied as a guardrail or gateway. It serves as a standalone solution or part of a wider safety system across sectors, including rail, offshore, construction and data centres.
Designed to be durable and fire-retardant, GRP handrail tube requires no regular treatment or replacement and is low-maintenance.
The GroundTuff Urban is a lightweight yet durable temporary ground protection solution, supporting a load capacity of up to 35 tonnes*.
Manufactured from 100% recyclable High-Density Polyethene (HDPE), each mat measures 1100mm x 2400mm in size, 8mm thick.
Designed with a smooth finish and a 4-bar chequered plate surface, which provides the benefits of anti-slip properties, minimising risks of slips, trips and falls, and features the opportunity for ease of wheeled access making this mat suitable for many applications.
Like other mats in our GroundTuff range, the GroundTuff Urban features a design of corner and side holes that provide connection points, allowing for mats to be joined together. Compatible with our full range of 2-way and 4-way connectors.
A combination of being lightweight and with design of integrated handholds provides the opportunity for a quick layout, supporting the meeting of project demands and deadlines. Mats can easily be repositioned depending on bespoke area requirements and used time and time again.
*Load bearing capacity is dependent on ground conditions and load characteristics.Mats can be cut into half sizes, with an additonal cutting fee. Ask the team for more details.
GroundTuff bevel edges enhance safety by minimising the risk of trips and falls whilst being aesthetically pleasing. The bevels provide a complete ramping area to the mats supporting pedestrian safety and proving accessibility, making the edging friendly for wheelchair, pushchair, and trolley uses.
Available in male and female formats, fitting perfectly down each side of the mat. Male connectors interlock on the top size of the mat on two sides and female interlock on the underneath side on the opposing two sides. Manufactured from the same material as GroundTuff, 100% recycled PVC, making the bevels versatile, durable and weather-resistant. Designed to be suitable for heavy footfall areas and featuring non-slip properties, whilst remaining lightweight for easy set up and relocation.
Logo Mats provide excellent marketing and brand awareness to make first impressions count whilst the 100% recycled post-consumer PET twisted surface, offers fantastic water absorption and dirt removal. The 100% nitrile backing also ensures minimal movement once in place. Each mat is custom made to your individual requirements and is manufactured using advanced printing processes to ensure your message or logo is the perfect match.Once you have decided on the size of your mat, email a high-resolution image of your design and your brand guidelines to sales@bluediamond.uk.com in either PDF, JPEG or similar file format. Once the order is confirmed, you will receive a full colour proof for your approval. Please note your design will be closely matched from our range of over 100 colours.
Anti-Slip GRP Flat Sheet is an ideal immediate solution for providing highly effective anti-slip flooring to minimise the risk of slips, trips and falls. Designed to be fitted directly onto concrete, metal, wood and much more, the simple design allows for quick and easy installation, ensuring limited downtime and disruption. Our Anti-slip GRP Flat Sheets are manufactured from the highest quality fibreglass, to ensure longevity and maximum protection making them suitable for both wet and dry environments.Available in a range of standard lengths, our flat sheets can also be cut to bespoke sizes for the perfect fit. Optional screws and adhesive are available to purchase if required.
Happy Feet is a heavy-duty anti-fatigue mat that features a 12.7mm dense foam cushion encapsulated in nitrile rubber, making it suitable for both wet and dry environments. Offering exceptional anti-fatigue benefits, the gripper backing minimises movement on the floor, whilst the textured surface and bevelled borders maximise safety. Happy Feet is a totally versatile mat, is welding safe and resistant to chemicals, animal fats, machine grease/oils and petroleum products.
ESD Kumfi Pebble has been specially designed to dissipate static electricity and reduce fatigue for medium duty areas. Simple tasks - working, walking or, even sitting on certain types of stools, can create static electric. When left unchecked, static can discharge into static sensitive equipment, potentially causing damage. Our ESD Kumfi Pebble drains static from workers, preventing unpleasant static shocks, whilst also safeguarding equipment. The pebble surface design provides anti-slip protection and the bevelled edges on all sides minimises the risk of tripping. Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Aquasorb is intended for use in medium to heavy traffic areas, with the raised crush resistant waffle design providing an aggressive scraping and cleaning action. The rubber perimeter traps dirt and moisture for superb soil and moisture control, making it ideal for use in entranceways and lobbies with regular foot traffic.
Our GRP Mini Mesh Grating is a specially designed and moulded non-slip composite floor solution, constructed from the highest quality fibreglass making it chemical, rust, and corrosion resistant, and lightweight, whilst also offering longevity and durability. With limited tooling and installation costs, we can offer a vast range of standard length and width sizes, plus our in-house cutting service means we can offer bespoke sizes for that perfect fit.Optional clips, bolts and clamps are available to purchase if required.
GRP Grating Clips and Clamps complement our range of GRP Grating and provide best-practice fixing methods for fastening and joining grating panels. We supply M Clips and C Clips to fit 25mm, 38mm and 50mm Grating, M Clip for Mini Mesh, universal J Clamp and our Square Fixing Clip and Fixing Disc for 25mm, 38mm and Mini Mesh Grating, all in stainless steel. We also supply Panel Fasteners Hex and Nut, Bolt, and Washer Sets.
GRP handrail tube is a lightweight, non-conductive, corrosion-resistant pultruded round tube manufactured from glass reinforced plastic (GRP). It cuts to size and installs with minimal tooling, keeping labour costs down across a wide range of project specifications. Commonly used as a handrail tubing along pedestrian walkways and staircases, or applied as a guardrail or gateway. It serves as a standalone solution or part of a wider safety system across sectors, including rail, offshore, construction and data centres. Designed to be durable and fire-retardant, GRP handrail tube requires no regular treatment or replacement and is low-maintenance.
The GroundTuff Urban is a lightweight yet durable temporary ground protection solution, supporting a load capacity of up to 35 tonnes*. Manufactured from 100% recyclable High-Density Polyethene (HDPE), each mat measures 1100mm x 2400mm in size, 8mm thick. Designed with a smooth finish and a 4-bar chequered plate surface, which provides the benefits of anti-slip properties, minimising risks of slips, trips and falls, and features the opportunity for ease of wheeled access making this mat suitable for many applications. Like other mats in our GroundTuff range, the GroundTuff Urban features a design of corner and side holes that provide connection points, allowing for mats to be joined together. Compatible with our full range of 2-way and 4-way connectors. A combination of being lightweight and with design of integrated handholds provides the opportunity for a quick layout, supporting the meeting of project demands and deadlines. Mats can easily be repositioned depending on bespoke area requirements and used time and time again. *Load bearing capacity is dependent on ground conditions and load characteristics.Mats can be cut into half sizes, with an additonal cutting fee. Ask the team for more details.
GroundTuff bevel edges enhance safety by minimising the risk of trips and falls whilst being aesthetically pleasing. The bevels provide a complete ramping area to the mats supporting pedestrian safety and proving accessibility, making the edging friendly for wheelchair, pushchair, and trolley uses. Available in male and female formats, fitting perfectly down each side of the mat. Male connectors interlock on the top size of the mat on two sides and female interlock on the underneath side on the opposing two sides. Manufactured from the same material as GroundTuff, 100% recycled PVC, making the bevels versatile, durable and weather-resistant. Designed to be suitable for heavy footfall areas and featuring non-slip properties, whilst remaining lightweight for easy set up and relocation.
Logo Mats provide excellent marketing and brand awareness to make first impressions count whilst the 100% recycled post-consumer PET twisted surface, offers fantastic water absorption and dirt removal. The 100% nitrile backing also ensures minimal movement once in place. Each mat is custom made to your individual requirements and is manufactured using advanced printing processes to ensure your message or logo is the perfect match.Once you have decided on the size of your mat, email a high-resolution image of your design and your brand guidelines to sales@bluediamond.uk.com in either PDF, JPEG or similar file format. Once the order is confirmed, you will receive a full colour proof for your approval. Please note your design will be closely matched from our range of over 100 colours.
Anti-Slip GRP Flat Sheet is an ideal immediate solution for providing highly effective anti-slip flooring to minimise the risk of slips, trips and falls. Designed to be fitted directly onto concrete, metal, wood and much more, the simple design allows for quick and easy installation, ensuring limited downtime and disruption. Our Anti-slip GRP Flat Sheets are manufactured from the highest quality fibreglass, to ensure longevity and maximum protection making them suitable for both wet and dry environments.Available in a range of standard lengths, our flat sheets can also be cut to bespoke sizes for the perfect fit. Optional screws and adhesive are available to purchase if required.
Happy Feet is a heavy-duty anti-fatigue mat that features a 12.7mm dense foam cushion encapsulated in nitrile rubber, making it suitable for both wet and dry environments. Offering exceptional anti-fatigue benefits, the gripper backing minimises movement on the floor, whilst the textured surface and bevelled borders maximise safety. Happy Feet is a totally versatile mat, is welding safe and resistant to chemicals, animal fats, machine grease/oils and petroleum products.
ESD Kumfi Pebble has been specially designed to dissipate static electricity and reduce fatigue for medium duty areas. Simple tasks - working, walking or, even sitting on certain types of stools, can create static electric. When left unchecked, static can discharge into static sensitive equipment, potentially causing damage. Our ESD Kumfi Pebble drains static from workers, preventing unpleasant static shocks, whilst also safeguarding equipment. The pebble surface design provides anti-slip protection and the bevelled edges on all sides minimises the risk of tripping. Optional accessories available - Common Grounding Point Cord - Socket, Coiled Earth Lead – 10mm to 10mm Stud, Wrist Band, Earth Bonding Plug, and Heel Grounder. The matting can be supplied with studs if required.
We offer a range of optional accessories for our ESD matting range, designed to dissipate static electricity and prevent workers from unpleasant static shocks, whilst safeguarding equipment.Common Grounding Point Cord – Socket - Designed to provide a strong connection to ground, our cord is 3 mtrs (10ft) long and comes with a 10mm female stud/1Meg Ohm at both ends. The cords are specifically manufactured for effective safe grounding of operators working with ESD sensitive components to prevent a build-up of static discharge. The cord is insulated with PU material and the plastic parts of the coil cord are made with static-dissipative plastic material. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in light blue.Coiled Earth Lead – 10mm to 10mm Stud - Lightweight coil cord, designed to provide a strong connection to the ground. The coil can stretch to 1.8 mtrs (6ft) long and come with a 10mm female stud/1Meg Ohm at both ends. The coil cords can be stretched and recoiled back to its original length, helping to keep a clear working area for efficiency and comfort. They are essential for protecting workers and equipment in environments where static-sensitive electronic devices are used, repaired, manufactured, or assembled. The cord must be used in combination with a bonding point and wrist strap to ensure the operator is grounded. Available in dark blue.Earth Bonding Plug - Bonding Plugs offer a simple and easy method of grounding. Grounding cords can be connected to the Earth plug via the female stud at one end of the cord to a male stud on an Earth plug. Our Earth Bonding Plug incorporates 3 x 10mm male studs for grounding cord connection and is supplied with a 1 meg-ohm resistor. Designed to fit UK standard mains plug outlets and is available in yellow to visually stand out.Wrist Band - Crocheted lightweight design for maximum skin contact and comfort. The outer surface of the wrist band is non-conductive, and the inner surface of the strap is conductive, lined with 5-rows of double-ply silver yarn. The conductive woven fibres are silver for maximum conductivity and minimum skin irritation. The plastic parts of the strap are made from a static dissipative material. The band is fully adjustable and supplied with a 10mm stud as standard. Available in blue. Heel Grounder - Our premium, durable heel grounder is designed to be worn in an ESD working area. It’s quick and easy to use and can be adjusted with the hook and loop fastener (D-ring). The heel strap is black conductive on the outside and white on the inside to avoid any shoe marking. They are reusable and designed to be long-lasting. All of our ESD accessories are compliant with the following standards: IEC 61340-5-1, CE approved, REACH, and RoHS.
Aquasorb is intended for use in medium to heavy traffic areas, with the raised crush resistant waffle design providing an aggressive scraping and cleaning action. The rubber perimeter traps dirt and moisture for superb soil and moisture control, making it ideal for use in entranceways and lobbies with regular foot traffic.
